Solwise 200Mbps Home Plug AV Adaptor with Simple Connect and 3 Ethernet ports
Targeted at the residential users, the Solwise Home Plug AV unit is using Intellons INT6400 high-speed powerline chipset. With transfer rates of 200Mbps, Ethernet Home Plug AV can easily support full multimedia home networking throughout the whole house including simultaneous High Definition (HD) and Standard Definition (SD) video distribution, whole-house audio, Voice Over IP and high speed Internet in addition to data networking. It uses the power lines already installed in a home as a path to transmit digital data, voice, audio and video between devices.
Enhanced Quality of Service (QOS) also provides the guaranteed bandwidth reservations for multimedia payloads including TV over IP (IPTV), higher data rate broadband sharing, Online-Gaming, VoIP Calls, extending Wireless LANs coverage, Audio-Video transmission across the network as well as Network camera connectivity.
It is a plug, push and play solution that can be used wherever there is a wall socket, acting just like a physical network cable, streaming bandwidth to any room in the house. I t comes with a 128-bit AES encryption ensuring that your network communications is free from eavesdroppers and hackers. The Auto MDI/MDIX functionality of the Solwise Home Plug AV also simplifies and ensures a hassle free installation.
The Solwise Home Plug AV offers SimpleConnect - a simpler way to set up your Home Plug network. With just the press of a button, Home Plug AV devices can create or join a secure network. No computer is needed.
To ensure maximum security, the button on each Home Plug AV device in the network must be pushed within 2 minutes of the first one being pushed. More units can be added later, though - details are in the manual. You do not need to reset the whole Home Plug AV network.
These units are sold as singles, you will require at least two to create your network. These versions of the AV products will talk to other AV products so long as they are on version 3 firmware or newer.
Features
- Wallmount type and power voltage range of 85 to 265 VAC 50/60Hz
- HomePlug AV 1.0 compliant and Co-existence with HomePlug 1.0 Nodes
- Support QAM 1024/256/64/16/8, QPSK, BPSK, and ROBO modulation schemes
- PLC Up to 200 Mbps data rate on the power line.
- 128-bit AES Link Encryption for PLC
- Windowed OFDM with noise mitigation based on patented line synchronization techniques improves data integrity in noisy conditions
- Dynamic channel adaptation and channel estimation maximizes throughput in harsh channel conditions
- TDMA and priority-based CSMA/CA channel access schemes maximize efficiency and throughput
- Integrated Quality of Service (QoS) Enhancements: contention-free access, four-level priority based contention access, and multi segment bursting
- ToS and CoS Packet Classifiers
- Supports IGMP managed multicast sessions
| Specification |
| Chipset |
Intellon INT6400 |
| Protocol |
HomePlug AV 1.0
IEEE 802.3 10/100 Ethernet (100Mbps)
IEEE 802.3u Fast Ethernet
Co-exists with existing HomePlug 1.0 |
| PLC Rate |
200Mbit/s |
| Encryption |
128-bit AES |
| QoS |
Support contention-free access, four-level priority based
contention access, and multi segment bursting
Support VLAN Priority
Support ToS and CoS Packet Classifier |
| NOTE : Specifications are subject to change without prior notice. |
