Solwise 200Mbps Home Plug AV Ethernet Adaptor with Simple Connect & Mains Through
The Home Plug wireless access point offers high capacity for HD and SD multimedia distribution, while carrying other Internet services, is easy to use, simple to install and requires no new wires. It instantly converts existing power lines installations into high-speed virtual Ethernet networks. It is a desktop WiFi Access Point which inclused built in 200Meg Home Plug AV and also includes 4 LAN ports for local ethernet devices.
The 200Mbps Home Plug wireless access point combines the benefits of Home Plug AV and 802.11n Wireless-N features, providing dedicated PowerLine data rates up to 200Mbps - perfect for streaming HD IPTV and VoD (Video-on-Demand) while offering full in-house wireless coverage at a speed up to 300Mbps*. On top of that it also has built-in QoS (Quality-of-Service) engine for enchanced Internet experience.
When used as a standard access point the 11NRT offers all the functions you would expect from a high specification 11n access point plus 200Meg Home Plug AV connectivity. For PowerLine security, the PL-200AV11NRT supports 128-bit Advanced Encryption Standard (AES) to ensure maximum security. It also comes with a "Simple Connect" button to enable the security and pairing up of Home Plug devices at a touch of a button. For maximum wireless security, the Home Plug wireless AP supports WEP, WPA and WPA2 with WPS (Wi-Fi Protected Setup).
Applications: High Definition (HD) and Standard Definition (SD) video distribution, TV over IP (IPTV), Higher data rate broadband sharing, Shared broadband internet access, Audio and video streaming and transfer, Expanding the coverage of wireless LANs, Voice over Internet Protocol (VoIP), PC files and applications sharing, Printer and peripheral sharing, Network and online gaming, Security camera.
The PL-200AV11NRT AP is compatible with all Home Plug AV products so long as the adapters are using Ver2 firmware. You will require at least two Home Plug devices to create your network.
Key Features:
- Powerline speed up to 200Mbps - perfect for streaming HD IPTV & Video-On-Demand
- Full in-house Wireless Coverage at a speed up to 300Mbps*
- Maximum Powerline & Wireless Security
- Built-in QoS Engine for Enhanced Internet Experience
- Easy set up with Powerline & Wireless Push Button functions
| Specification |
| Standards |
Home Plug® AV
Wireless-Draft N 2.0
Ethernet: IEEE 802.3, Auto MDI/MDIX |
| Protocols |
TDMA & CSMA/CA |
| Data Transfer Rate |
200Mbps over powerline
300Mbps over Wireless |
| Modulation |
OFDM symbol modulation, DQPSK, DBPSK, ROBO
Carrier Modulation
Wireless: DSSS (802.11b), OFDM (802.11g) |
| Range |
200m over powerline
500m over Wireless |
| Security |
128-bit AES encryption (Powerline)
WEP, WPA, WPA2 (Wireless) |
| Indicator LEDs |
1 x Power
1 x Multi-colour Powerline Link/Act
4 x Eth Link/Act
Wireless Link/Act
USB
Simple connect
WPS
WAN |
| External Interfaces |
1 x Ethernet 10/100 Mbps WAN Port
4 x Ethernet 10/100 Mbps LAN Ports
1 x Reset Button
1 x USB Host port
1 x Push Button for Simple Connect
1 x Push Button for WPS
1 x Power Input
1 x On/Off Push Button (Optional) |
| Dimensions |
30(H) x 200(W) X 125(D) mm |
| Weight |
260g |
| Power Consumption |
18W, 1.5A |
| Temperature |
(-)25" to 70" Celsius
0" to 40" Celsius |
| Environment |
30% to 80% Humidity (Non-Condensing) |
| Operating Systems |
Windows® XP, Windows® Vista, etc |
| NOTE : Specifications are subject to change without prior notice.
|
*Maximum wireless signal rate derived from IEEE Standard 802.11g and draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, buildings materials and construction, and network overhead, lower actual data throughput rate.
