0 items:  £0.00
View Basket
Checkout

ADSL-SAR-605EW

ADSL-SAR-605EW

The Solwise SAR-605EW ADSL2/2+ Wireless LAN 802.11g++ 4 Port Switch Combo Gateway uses Texas Instruments AR7 with 1350A for wireless combined Chipset solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite), ADSL standard. The Solwise SAR-605EW also provides future proof functionality with higher data transmission rates with ADSL2, ADSL2+, and Extended Reach-ADSL support. This next generation ADSL will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+. Targeted at the residential and SOHO users, it is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a combined ADSL2/2+ Ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Managed Switch for future IPTV deployment, high speed 125Mbps EEE802.11b/g/g++ Wireless LAN Access point and true firewall capability functionality. Security is provided via a double Stateful Packet Inspection and NAT based firewall and Hardware accelerated AES/WEP/WPA based encryption/MAC Address Filtering for Wireless links.

RRP £38.60
£41.13 inc.VAT

Add to Basket

Specifications
ADSL/ATM Support • ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready
Rate Adaptive modem at 32 Kbps steps
Dynamic Adaptive Equalisation to improve Carrier’s service area
Bridge Tap Mitigation support
ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
AAL ATM Attributes - AAL5
Multiple PVC up to 16 support
Spectral compatibility with POTS
F4 & F5 OAM Loopback/Send and Receive
Annex B population option
TR-067 compliant
PVC to VLAN Mapping
Encapsulation Support RFC2684 Bridge and Routed LLC and VC Mux support
RFC2364 PPPoA Client support
RFC2516 PPPoE Client support
RFC2225/RFC1577 Classical IP Support
Transparent Bridge Support
PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support Static IP, Dynamic RIP routing support
IP/TCP/UDP/ICMP/ARP/RARP Application Support
Network Address Translation (NAT)
Port Mapping/Forwarding
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
Multiple Sessions IP Sec and PPTP/L2TP VPN pass through (Multiple IPSec sessions to a single server) support
PPP Always on with configurable timeout
PPP Dial on Demand
Universal Plug and Play Support
WLAN Support IEEE 802.11, 802.11b and 802.11g compliant
Supports 802.11b, 802.11g and 802.11g++ simultaneously
Transmit output power up to 20dBm (standard)
Transmit output power up to 23dBm with change to 5V high-power 1350A daughter board
Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity(Wi-Fi tm) Standard
Support seamless WLAN roaming
Frequency Band :
· 2412 MHz - 2462 MHz (North America/FCC)
· 2412 MHz - 2472 MHz (ETSI/Europe)
· 2412 MHz - 2484 MHz (Japan)
· 2457 MHz - 2472 MHz (France)
· 2457 MHz – 2462 MHz (Spain)
Support Direct Sequence Spread Spectrum (DSSS) technology
Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
Wireless Media Access Protocol- CSMA/CA with ACK
64/128/256Bit WEP Encryption
WPA/WPA2 Support
Dynamic Rate Scaling from 125, 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s
Operating Range of >300 Meters (Open Air)
Extended Range with 802.11g++ support
Management Support Web Based HTTP management GUI
TFTP/FTP Support for Firmware Upgrade
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Diagnostic Test (DSL, OAM, Network, Ping Test)
Telnet/CLI (Read Only)
Syslog Support
Firmware upgrade-able for future feature enhancement
TR-069 Support with firmware upgrade
Security Support NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
Hardware Texas Instrument TNETD7300EZDW (TI7200) Single Chip Network Processor/AFE/Line Driver Chipset
IC Plus IP175C 5 PORT 10/100 MAC/PHY Switch (Support Auto MDI/MDIx)
Texas Instrument TNETW1350A based IEEE802.11b/g Daughter Board
4 MB Flash ROM (Upgrade option to 8MB)
16 MB SDRAM
Dying Gasp Support (Population Option)
ITU K.21 Support
GDT Support (Population Option)
Platform Support

For Ethernet and Wireless LAN
OS Independent

Power Requirements •  Input Voltage : 9V DC +/- 10%
•  Input Current : 1.0A
Replacement Power Suppy code - PSU024
Physical Specifications
LED Indicators

1 x “Power” LED (Green and Red LED)
4 x Ethernet Link Status (Green) LED
1 x “Wireless” LAN Link/Activity Status (Green) LED
1 x “DSL” Status (Green) LED
1 x “Internet” Status (Green) LED

External Connectors 1 x RJ-11 Telephone socket for ADSL line
4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
1 x DC Jack for Power Input
1 x Factory Default Reset Button
1 x On/Off Power Switch
1 x 180° Rotate-able 2.4Ghz 3 dBi Antenna (fixed)
Measurements Dimension : 156MMx135MMx34MM
Weight : Approx. 350 g
Regulatory Approvals US : FCC Part 15/68, UL 3rd Edition
Asia Pacific /Europe : CE, IEC 60950
Australia : A-Tick/C-Tick
Environmental
Temperature Operating : 0° to 40° Celsius
32° to 104° Fahrenheit
Non-Operating : -25° to 70° Celsius
-13° to 158° Fahrenheit
Humidity Operating : 30% to 80% Relative Humidity (Non-Condensing)
Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)



































































































































 

Downloads

Fix for no DNS after installing SP3 on Windows XP Download here 30.11.08
Quick Set up Guide Download here 27.06.08
User Manual Download here 27.06.08
Firmware as shipped Vr 120.68.1-005 Click here for details and instructions
You will need the serial number and model number from the label on the unit		 27.06.08
New f/w (better on long reach lines and for Zen) Vr 120.68.1-006.
 Download here 27.06.08
CD Contents Download here

27.06.08